Strong Neodymium Magic Ring Manufacturer - China Rare Earth Magnet Limited
Material: Sintered Neodymium Magnet
Grade: N35
Shape: Ring
As must-haves for every magician, strong magnetic magic rings can be used in different magic & magnetic jewelry. As long as you exert you imagination and originality, this small permanent magnet ring will have endless changes. Meanwhile, it can be used in former magic, including: teleportation, fetching objects from a distance, moving things through minds, coins going through glass, cap falling into the bottle, coins going through into bottle, pausing time and so on. It is packed in transparent organic box with shockproof packing, which looks exquisite and elegant.
Cyril once had used this ring to perform magic act.
Although this is only a tool, it can be used in different magic. When you have this neodymium ring magnet, you can use it to perform numerous magical effects. Also, you can use it in various magic.
18(small size): inner diameter: 18mm inner circumference: 56.52mm
19(medium size): inner diameter: 19mm inner circumference: 59.66mm
20(big size): inner diameter: 20mm inner circumference: 62.8mm
It is better for purchasers to measure his/her middle finger of the right hand. First, you can twirl your finger with a rope and then measure the length of the twirling rope. It is easily to hide it when you wear it on the middle finger. Also, you can wear it on the index finger. Due to the different sizes of everyone’s fingers, it has two measuring method. First, if the joint of the finger which you wear the ring is thick, you have to measure the joint. Second, if your finger thinner than the joint, you can measure your finger.
Inner diameter of big size: 20mm
Inner diameter of medium size: 19mm
Inner diameter of small size: 18mm
Due to manual measuring method, it will inevitably cause some errors to some extend.
Attention please! Due to the special characteristics of this ring, please avoid the collision with hard objects.
As a pure magnetic ring, this sintered NdFeB magnet ring has good-looking appearance and high quality. It has wide ranges of application, which is necessary for every magician. Cyril had uses this ring to perform many magic shows.
This is a permanent magnetic tool which can be used in different magic. When you have this ring, you can use it to perform numerous magical effects. Also, you can use it in various magic. As long as you exert you imagination and originality, this small magnetic ring will have endless changes. According to an authoritative expert, this magnetic ring which can be used to design at least thousands of close shot magic shows brings magicians new inventions and achievements.
Neodymium magnetic rings have appeared on foreign magical websites long time ago. But possibly due to the problems of technology and cost, full magnetic rings don't appear until recent years. Formerly, most rings have magnetism in some parts and the ring is an ordinary one with strong magnetism as particularity.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet, Ring Magnet
2014年10月21日星期二
2014年10月14日星期二
Neodymium Permanent Magnets Manufacturers Favors the Application Prospect of Compressor Motor
Permanent Magnet Manufacturer - China Rare Earth Magnet Limited
Hosted by Online Industry and Committee of National Energy System Standardized Technology in Beijing, Chinese HVAC and Air Conditioner Annual Development Conference & Environmental Protection Forum were successfully rounded off. This is a grand event that covers fields of conditioner, HVAC, refrigeration and upstream and downstream industrial chain. Manufacturers of air-conditioner, compressor and dc motor all participated in this conference.
Upstream suppliers of raw material attach great importance to this conference. Based on the constant promotion of air-conditioner, or even of the efficiency of white goods, neodymium magnet compressors and permanent magnet motors have promising prospects.
Permanent magnet material business all agree that neodymium magnet is the undisputedly best magnet steel for motors which has excellent opportunities in white goods industry. But due to price with frequent fluctuation, application has been influenced and also it has to face difficulties of innovation and tradition. Compressor businesses view that performance of magnet products has obvious advantages, however, it is hard to transfer rising cost to ultimate customers.
During the conference, upstream and downstream business probed into importance and necessity of developing trend and policy support. They positively sought chances of cooperation. In the respect of current demand and environment, market is tough and competition is fierce, but they were confident in the future market.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
Hosted by Online Industry and Committee of National Energy System Standardized Technology in Beijing, Chinese HVAC and Air Conditioner Annual Development Conference & Environmental Protection Forum were successfully rounded off. This is a grand event that covers fields of conditioner, HVAC, refrigeration and upstream and downstream industrial chain. Manufacturers of air-conditioner, compressor and dc motor all participated in this conference.
Upstream suppliers of raw material attach great importance to this conference. Based on the constant promotion of air-conditioner, or even of the efficiency of white goods, neodymium magnet compressors and permanent magnet motors have promising prospects.
Permanent magnet material business all agree that neodymium magnet is the undisputedly best magnet steel for motors which has excellent opportunities in white goods industry. But due to price with frequent fluctuation, application has been influenced and also it has to face difficulties of innovation and tradition. Compressor businesses view that performance of magnet products has obvious advantages, however, it is hard to transfer rising cost to ultimate customers.
During the conference, upstream and downstream business probed into importance and necessity of developing trend and policy support. They positively sought chances of cooperation. In the respect of current demand and environment, market is tough and competition is fierce, but they were confident in the future market.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
2014年9月24日星期三
Low Carbon Economy Boosts Development of Neodymium Industry
Permanent Magnet Manufacturer China Rare Earth Magnet Limited
In recent years, booming insidiously in domestic, low carbon economy has gradually become an important economic form. China governments have been offering active guidance and strong support to the development of low carbon economy, such as launching multiple favorable policies which sharply increase demand of neodymium magnet materials. It is expected that demand of NdFeB permanent magnets, by 2014, will reach 126,000 tons rising 15% year-on- year.
According to research studies, a hybrid vehicle consumes 2.5 kg neodymium permanent magnet material, and a pure electric car 5kg. The huge demand of neodymium iron boron magnets for new energy automobile will boost the development of NdFeB magnet, especially high-performance NdFeB rare earth magnets.
With quantity and quality, China neodymium magnetic products make a stricter standard for quality inspection. Manual inspection, easily affected by subjective emotion, may lead to errors or misdetections and safety of automobile can never be neglected. Therefore, methods of automated inspection, with intelligence, speed, accuracy and efficiency, have become a superior choice.
It is understood that Peking Lingbang Instruments, for the purpose of meeting diversified demands of neo permanent magnetic products, researches and develops apparatus used for inspecting NdFeB products’ dimension and appearance. It can work without a break for 24 hours everyday with its detection efficiency reaching 150-300pcs/min, which is able to inspect neodymium magnet products in large quantity. Also, this apparatus can implement full inspection to dimension and appearance defects of NdFeB products as well as automatic selection of qualified and unqualified products, avoiding errors and midsection. Its detection precision can reach within 10 micron which guarantees high quality detecting requirements of high-performance magnets.
Spurred on by new energy automobile, neodymium permanent magnet industry gradually restores growth. By 2020, the growth of demand of NdFeB worldwide will be stable at 10% or even more. Development of the whole industry will stimulate upgrade and progress in producing and processing as well as quality inspection.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, China Magnet, Rare Earth Magnet, Neodymium Magnet, NdFeB Magnet
In recent years, booming insidiously in domestic, low carbon economy has gradually become an important economic form. China governments have been offering active guidance and strong support to the development of low carbon economy, such as launching multiple favorable policies which sharply increase demand of neodymium magnet materials. It is expected that demand of NdFeB permanent magnets, by 2014, will reach 126,000 tons rising 15% year-on- year.
According to research studies, a hybrid vehicle consumes 2.5 kg neodymium permanent magnet material, and a pure electric car 5kg. The huge demand of neodymium iron boron magnets for new energy automobile will boost the development of NdFeB magnet, especially high-performance NdFeB rare earth magnets.
With quantity and quality, China neodymium magnetic products make a stricter standard for quality inspection. Manual inspection, easily affected by subjective emotion, may lead to errors or misdetections and safety of automobile can never be neglected. Therefore, methods of automated inspection, with intelligence, speed, accuracy and efficiency, have become a superior choice.
It is understood that Peking Lingbang Instruments, for the purpose of meeting diversified demands of neo permanent magnetic products, researches and develops apparatus used for inspecting NdFeB products’ dimension and appearance. It can work without a break for 24 hours everyday with its detection efficiency reaching 150-300pcs/min, which is able to inspect neodymium magnet products in large quantity. Also, this apparatus can implement full inspection to dimension and appearance defects of NdFeB products as well as automatic selection of qualified and unqualified products, avoiding errors and midsection. Its detection precision can reach within 10 micron which guarantees high quality detecting requirements of high-performance magnets.
Spurred on by new energy automobile, neodymium permanent magnet industry gradually restores growth. By 2020, the growth of demand of NdFeB worldwide will be stable at 10% or even more. Development of the whole industry will stimulate upgrade and progress in producing and processing as well as quality inspection.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, China Magnet, Rare Earth Magnet, Neodymium Magnet, NdFeB Magnet
2014年6月20日星期五
Large Semi-circular Segment Permanent Magnet Manufacturer – China Rare Earth Magnet Limited
Where to buy neodymium magnets?
---Looking for N50 Semi-circular Segment Neodymium Rare Earth Permanent Magnet
Could you custom magnets? If not, where to buy semi-circular neodymium magnets? I want large sizes.
---Magnet Manufacturer China Rare Earth Magnet Limited:
Are you looking for semi-ring magnets, as picture below, right?
We are professional manufacturer of various permanent magnets as each client's requirements. Please feel free to inform us the detailed size of magnets that you want, including Outer diameter, Inner diameter and thickness. The biggest size of magnet varies with different material & grade. Therefore, please also inform us the material and grade of your magnet, so that we could consider whether it's feasible or not accordingly.
---Client of Large Neodymium Magnet in Semi-circular Segment Shape:
The sizes of N50 rare earth permanent magnets that I am looking for as follows:
I am interested in Semi-circular segment Magnet of total Outer Diameter 240mm, Inner Radius 180mm, Length 25mm or 50mm, N50, 180degrees, Outer of magnet is North Pole, Inner is South Pole.
N50, OD240 x ID180 x 180º x 25/50mm
I am interested in Semi-Circular Segment Magnet of total Size Outer Diameter 160 mm, Inner Diameter 100mm, Length 25mm or 50mm, N50, Outer of Magnet is North Pole and Inner is South Pole.
N50, OD160 x ID100 x 180º x 25/50mm
I am interested in Semi-Circular Segments Magnets of total outer Diameter of 75 mm inner Diameter of 45mm, Length 25mm or 50mm, N50, Outer Magnet is North Pole and inner is South Pole
N50, OD75 x ID45 x 180º x 25/50mm
China Rare Earth Magnet Limited
Tags: Permanent Magnet, China Magnet, Neodymium Magnets
---Looking for N50 Semi-circular Segment Neodymium Rare Earth Permanent Magnet
Could you custom magnets? If not, where to buy semi-circular neodymium magnets? I want large sizes.
---Magnet Manufacturer China Rare Earth Magnet Limited:
Are you looking for semi-ring magnets, as picture below, right?
We are professional manufacturer of various permanent magnets as each client's requirements. Please feel free to inform us the detailed size of magnets that you want, including Outer diameter, Inner diameter and thickness. The biggest size of magnet varies with different material & grade. Therefore, please also inform us the material and grade of your magnet, so that we could consider whether it's feasible or not accordingly.
---Client of Large Neodymium Magnet in Semi-circular Segment Shape:
The sizes of N50 rare earth permanent magnets that I am looking for as follows:
I am interested in Semi-circular segment Magnet of total Outer Diameter 240mm, Inner Radius 180mm, Length 25mm or 50mm, N50, 180degrees, Outer of magnet is North Pole, Inner is South Pole.
N50, OD240 x ID180 x 180º x 25/50mm
I am interested in Semi-Circular Segment Magnet of total Size Outer Diameter 160 mm, Inner Diameter 100mm, Length 25mm or 50mm, N50, Outer of Magnet is North Pole and Inner is South Pole.
N50, OD160 x ID100 x 180º x 25/50mm
I am interested in Semi-Circular Segments Magnets of total outer Diameter of 75 mm inner Diameter of 45mm, Length 25mm or 50mm, N50, Outer Magnet is North Pole and inner is South Pole
N50, OD75 x ID45 x 180º x 25/50mm
China Rare Earth Magnet Limited
Tags: Permanent Magnet, China Magnet, Neodymium Magnets
2014年6月17日星期二
China Neodymium Permanent Magnet Manufacturer – China Rare Earth Magnet Limited
Custom Neodymium Magnets
---Looking for China Neodymium Permanent Magnet
Please advise if you are capable of producing the magnet in the following drawing.
R: Critical Characteristic – Receiving
Each shipment will be checked for compliance by receiving inspection
I: Critical Characteristic – Inspection
The fabrication process must be monitored and verified with retained dimensional or test data.
C: Critical Characteristic – Critical
Fabrication must be verified with statistical process control (SPC) with retained statistical data.
Require each shipment from an outside permanent magnets manufacturer must include copies of the data collected for all critical characteristics.
Notes:
APPROVED MAT’L VACODYM 688 AP
NOTCH INDICATES MAGNETICALLY “COLD” SIDE.
DIMENSIONS MARKED WITH “*” NEED ONLY BE VERIFIED DURING PPAP OR ANNUAL RE-CERTIFICATION.
---China Magnet Manufacturer China Rare Earth Magnet Limited
We can customize the magnets as the drawing. But before making quote, we need to know more information about the permanent magnets.
(1) The grade of magnet? If you don't know about the grade, please tell us the working temperature and application of the magnets.
(2) The quantity of magnets
We will send you quotation after receiving your reply.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, China Magnet
---Looking for China Neodymium Permanent Magnet
Please advise if you are capable of producing the magnet in the following drawing.
R: Critical Characteristic – Receiving
Each shipment will be checked for compliance by receiving inspection
I: Critical Characteristic – Inspection
The fabrication process must be monitored and verified with retained dimensional or test data.
C: Critical Characteristic – Critical
Fabrication must be verified with statistical process control (SPC) with retained statistical data.
Require each shipment from an outside permanent magnets manufacturer must include copies of the data collected for all critical characteristics.
Notes:
APPROVED MAT’L VACODYM 688 AP
NOTCH INDICATES MAGNETICALLY “COLD” SIDE.
DIMENSIONS MARKED WITH “*” NEED ONLY BE VERIFIED DURING PPAP OR ANNUAL RE-CERTIFICATION.
---China Magnet Manufacturer China Rare Earth Magnet Limited
We can customize the magnets as the drawing. But before making quote, we need to know more information about the permanent magnets.
(1) The grade of magnet? If you don't know about the grade, please tell us the working temperature and application of the magnets.
(2) The quantity of magnets
We will send you quotation after receiving your reply.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, China Magnet
2014年5月29日星期四
Prices of Permanent Magnets 20140521
N48, N38, N35 Neodymium Magnets
---Quotation of N48 Neodymium Block Permanent Magnet with Two Holes
We confirmed that we can manufacture the magnets as per your required
Please check the price as follows:
Material: Sintered Neodymium Magnets
Grade: N48
Size: 15x10x2xd2mm (as per your drawing)
Coating: Black high ware resistance epoxy
Magnetization: Magnetized
Magnetization Direction: Through 2mm
Quantity: 100,000pcs
FCA Shanghai USD***/pc
---Quotation of N38 25x10x5mm Permanent Magnets
Below we list our price for your reference:
Material: Sintered Neodymium Magnet
Grade: N38 Size: 25x10x5mm
Coating: NiCuNi
Magnetization: Magnetized
Magnetization Direction: Through thickness 5mm (as picture below)
Quantity/FCA Hong Kong Price:
17,000pcs/USD***/pc
34,000pcs/USD***/pc
---Quotation of N35 8x8x4mm Neodymium Magnets
Please check the price for 100pcs as follows:
Type: Rare Earth Permanent Magnet
Material: Neodymium Iron Boron Magnets
Grade: N35 Size: 8x8x4mm
Plating: NiCuNi
Magnetization: Magnetized
Magnetization Direction: Through 4mm
Ex-works Shenzhen USD***/pc
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
---Quotation of N48 Neodymium Block Permanent Magnet with Two Holes
We confirmed that we can manufacture the magnets as per your required
Please check the price as follows:
Material: Sintered Neodymium Magnets
Grade: N48
Size: 15x10x2xd2mm (as per your drawing)
Coating: Black high ware resistance epoxy
Magnetization: Magnetized
Magnetization Direction: Through 2mm
Quantity: 100,000pcs
FCA Shanghai USD***/pc
---Quotation of N38 25x10x5mm Permanent Magnets
Below we list our price for your reference:
Material: Sintered Neodymium Magnet
Grade: N38 Size: 25x10x5mm
Coating: NiCuNi
Magnetization: Magnetized
Magnetization Direction: Through thickness 5mm (as picture below)
Quantity/FCA Hong Kong Price:
17,000pcs/USD***/pc
34,000pcs/USD***/pc
---Quotation of N35 8x8x4mm Neodymium Magnets
Please check the price for 100pcs as follows:
Type: Rare Earth Permanent Magnet
Material: Neodymium Iron Boron Magnets
Grade: N35 Size: 8x8x4mm
Plating: NiCuNi
Magnetization: Magnetized
Magnetization Direction: Through 4mm
Ex-works Shenzhen USD***/pc
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
2014年5月7日星期三
Neodymium Permanent Magnet - China Rare Earth Magnet Limited
Neodymium Disc Magnets, Neodymium Block Magnets, Neodymium Disc Magnet with Adhesive Tape
---We are looking for a reliable supplier of permanent magnetic materials. Please see attached RFQ.
Neodymium Iron Boron (NdFeB) Magnets
Permanent Disc Magnets
50000pcs; Size: .250" Dia. x .100" Thick; Grade: N50; Finish: Ni/Cu/Ni Plate 50000pcs; Size: .500" Dia. x .060" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate 5000pcs; Size: .500" Dia. x .125" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
Permanent Block Magnets
5000pcs; Size: 1.000" Long x .250" Wide x .125" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
5000pcs; Size: 1.000" Long x .5" Wide x .125" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
5000pcs; Size: 1.000" Long x .5" Wide x .06" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
1500000pcs; Size: .500" Dia. x .060" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate This item will have adhesive (TESA4970) on one side of the magnet as shown
This item will be released in increments of 250,000pcs per month starting in July 2014
We will not only need pricing for the product but an estimate for AIR FREIGHT for each of the Neodymium Magnets. Most of the time, we like to ship these NdFeB permanent magnets via AIR FREIGHT.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet, NdFeB Magnet
---We are looking for a reliable supplier of permanent magnetic materials. Please see attached RFQ.
Neodymium Iron Boron (NdFeB) Magnets
Permanent Disc Magnets
50000pcs; Size: .250" Dia. x .100" Thick; Grade: N50; Finish: Ni/Cu/Ni Plate 50000pcs; Size: .500" Dia. x .060" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate 5000pcs; Size: .500" Dia. x .125" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
Permanent Block Magnets
5000pcs; Size: 1.000" Long x .250" Wide x .125" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
5000pcs; Size: 1.000" Long x .5" Wide x .125" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
5000pcs; Size: 1.000" Long x .5" Wide x .06" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate
1500000pcs; Size: .500" Dia. x .060" Thick; Grade: N35; Finish: Ni/Cu/Ni Plate This item will have adhesive (TESA4970) on one side of the magnet as shown
This item will be released in increments of 250,000pcs per month starting in July 2014
We will not only need pricing for the product but an estimate for AIR FREIGHT for each of the Neodymium Magnets. Most of the time, we like to ship these NdFeB permanent magnets via AIR FREIGHT.
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet, NdFeB Magnet
2014年4月30日星期三
Neodymium Permanent Magnet Blocks, Arc
N38SH & N38EH 70x10x6mm Magnets, R150xr80x5mmx34° Magnets
---We are building one prototyp od electrical machine and needs permanent magnets. We need block magnets with dimentions 70x10x6mm and arc magnets with inner radius 80mm, outer radius 150mm, thickness 5mm and angle 34°. All magnets should be magnetized through the tickness. The magnets should have NiCuNi coating. Could you make 2 offers? First with neodymium magnet grade N38SH and second with grade N38EH
---Could you please send us a drawing of the arc magnets with every dimension on it? So that we can avoid any misunderstanding! It is very important. We will quote you the price after receiving the drawing.
---I am sending a drawing of the arc permanent magnet. The units are in mm. The tickness of magnet is 5mm.
---One more question need you confirm: what is the magnetization direction of the magnets? Commonly, the magnetization direction of arc magnets is through diameter. But your permanent magnets are too big to be magnetized through diameter. The longest length of sintered neodymium magnets which can be magnetize is less than 50mm.
---The magnetization should be through thickness (5 mm).
---Please check the enclosed drawing of the arc mangets and make sure it is correct!
Please check the price of the magnets as follows:
Type: Rare Earth Permanent Magnet
Material: Sintered Neodymium Magnet (NdFeB)
Plating: NiCuNi
Magnetization: Magnetized
70x10x6mm/N38SH/Magnetized Through Thickness/Ex-works Shenzhen USD***/pc 70x10x6mm/N38EH/Magnetized Through Thickness/Ex-works Shenzhen USD***/pc R150xr80x5mmx34° (as per the drawing)/N38SH/Magnetized Through 5mm/Ex-works Shenzhen USD***/pc R150xr80x5mmx34° (as per the drawing)/N38EH/Magnetized Through 5mm/Ex-works Shenzhen USD***/pc
If you decide to order the permanent magnetic blocks & arcs, please feel free to contact us!
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
---We are building one prototyp od electrical machine and needs permanent magnets. We need block magnets with dimentions 70x10x6mm and arc magnets with inner radius 80mm, outer radius 150mm, thickness 5mm and angle 34°. All magnets should be magnetized through the tickness. The magnets should have NiCuNi coating. Could you make 2 offers? First with neodymium magnet grade N38SH and second with grade N38EH
---Could you please send us a drawing of the arc magnets with every dimension on it? So that we can avoid any misunderstanding! It is very important. We will quote you the price after receiving the drawing.
---I am sending a drawing of the arc permanent magnet. The units are in mm. The tickness of magnet is 5mm.
---One more question need you confirm: what is the magnetization direction of the magnets? Commonly, the magnetization direction of arc magnets is through diameter. But your permanent magnets are too big to be magnetized through diameter. The longest length of sintered neodymium magnets which can be magnetize is less than 50mm.
---The magnetization should be through thickness (5 mm).
---Please check the enclosed drawing of the arc mangets and make sure it is correct!
Please check the price of the magnets as follows:
Type: Rare Earth Permanent Magnet
Material: Sintered Neodymium Magnet (NdFeB)
Plating: NiCuNi
Magnetization: Magnetized
70x10x6mm/N38SH/Magnetized Through Thickness/Ex-works Shenzhen USD***/pc 70x10x6mm/N38EH/Magnetized Through Thickness/Ex-works Shenzhen USD***/pc R150xr80x5mmx34° (as per the drawing)/N38SH/Magnetized Through 5mm/Ex-works Shenzhen USD***/pc R150xr80x5mmx34° (as per the drawing)/N38EH/Magnetized Through 5mm/Ex-works Shenzhen USD***/pc
If you decide to order the permanent magnetic blocks & arcs, please feel free to contact us!
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
2014年4月24日星期四
China Customized Neodymium Permanent Magnet
Small Neodymium Magnets, Disc, Block Neodymium Magnets
---Our company needs 10mm (diameter) x 0.5mm (thickness) N35 Neodymium permanent magnet. Could you supply this material? And how much does it cost for first order?
---We customize various neodymium magnets for overseas customers. Both the quality and price of our magnets are competitive. Please find our quotation as follows: Type: Rare Earth Permanent Magnet Material: Sintered NdFeB Magnet Size: D10x0.5mm Grade: N35 Coating: NiCuNi Magnetized through 0.5mm Unit Price: Ex-works Shenzhen USD***/pc
---Since we are trying to finalize an offer, we need the actual price for the permanent magnets: 50,3 x 5 x 3mm type N33SH, 42.000 units 44,0 x 5 x 3mm type N40H, 56.000 units Please let me know an approx. delivery time for these quantities
---The permanent magnet you ordered is 50.5x5x3mm. So we quote you based on both sizes. Material: Sintered Neodymium Magnet Coating: NiCuNi Magnetized through 3mm Size / Grade / Quantity / Unit Price : 50.5x5x3xR0.3mm / N33SH / 42000pcs / FOB Shanghai USD***/pc 50.3x5x3xR0.3mm / N33SH / 42000pcs / FOB Shanghai USD***/pc 44.0x5x3xR0.3mm / N40SH / 56000pcs / FOB Shanghai USD***/pc
---I need same item N35 30x18x2mm only change need black color. What is best price for 20000pcs black color?
---We sent you quotation as follows for permanent magnets 30x18x2mm. 30x18x2mm, N35, Magnetized through 2mm, Black Nickel, CFR Hong Kong USD***/pc 30x18x2mm, N35, Magnetized through 2mm, Black Epoxy, CFR Hong Kong USD***/pc
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
---Our company needs 10mm (diameter) x 0.5mm (thickness) N35 Neodymium permanent magnet. Could you supply this material? And how much does it cost for first order?
---We customize various neodymium magnets for overseas customers. Both the quality and price of our magnets are competitive. Please find our quotation as follows: Type: Rare Earth Permanent Magnet Material: Sintered NdFeB Magnet Size: D10x0.5mm Grade: N35 Coating: NiCuNi Magnetized through 0.5mm Unit Price: Ex-works Shenzhen USD***/pc
---Since we are trying to finalize an offer, we need the actual price for the permanent magnets: 50,3 x 5 x 3mm type N33SH, 42.000 units 44,0 x 5 x 3mm type N40H, 56.000 units Please let me know an approx. delivery time for these quantities
---The permanent magnet you ordered is 50.5x5x3mm. So we quote you based on both sizes. Material: Sintered Neodymium Magnet Coating: NiCuNi Magnetized through 3mm Size / Grade / Quantity / Unit Price : 50.5x5x3xR0.3mm / N33SH / 42000pcs / FOB Shanghai USD***/pc 50.3x5x3xR0.3mm / N33SH / 42000pcs / FOB Shanghai USD***/pc 44.0x5x3xR0.3mm / N40SH / 56000pcs / FOB Shanghai USD***/pc
---I need same item N35 30x18x2mm only change need black color. What is best price for 20000pcs black color?
---We sent you quotation as follows for permanent magnets 30x18x2mm. 30x18x2mm, N35, Magnetized through 2mm, Black Nickel, CFR Hong Kong USD***/pc 30x18x2mm, N35, Magnetized through 2mm, Black Epoxy, CFR Hong Kong USD***/pc
China Rare Earth Magnet Limited
Tags: Permanent Magnet, Neodymium Magnet
2014年4月7日星期一
China N42 & N48 Permanent Magnet Manufacturer - China Rare Earth Magnet Limited
Large China Neodymium Ring Magnet & Arc Magnet D200xd100x50mm, R500x r400x20mmx4°
Client of China N42 Large Neodymium Ring Magnet:
I would be very grateful if you could prepare for me an offer for magnets below.
China Rare Earth Permanent Magnet
Type: N42
Surface/ Coating: NiCuNi
Magnetization direction: along the dimension of 100mm in diameter perpendicularly.
And I have a few questions:
Is there a huge difference in price between magnets N42 and N48?
Is it possible to divide the magnet in each plane into smaller parts if it reduce the price?
We are interested in the lowest production costs.
Custom Permanent Magnet Manufacturer – China Rare Earth Magnet Limited
D250xd100x100mm neodymium magnet is too large to be produced. It's not workable.
The largest size we can offer is D200xd100x50mm. Below I listed our offer based on both N42 and N48 grade, please kindly check:
Material: Sintered NdFeB Magnet
Size: D200xd100x50mm
Coating: NiCuNi, Magnetized through 50mm
Grade/FCA Shanghai Price: N42/USD***/pc
N48/USD***/pc
Mould Fee: USD***
Client of D200xd100x50mm China Neodymium Permanent Magnet:
If I connect 4 magnets together (D200xd100x50mm) they will have the same properties such as one large magnet (D200xd100x200)?
Large Neodymium Magnets Manufacturer – China Rare Earth Magnet Limited
Yes, you understand correct. As theory predicts that, collecting 4pcs D200xd100x50mm magnets would be kind of stronger than one piece D200xd100x200mm magnets. While it's just a speculation, the details should only be known after test.
Client of China Large Permanent Magnet:
Now everything is clear.
Our R&D department is designing magnetic bearings for our wind turbines. We are looking for an ideal solution which will give us a product which will have specified technical parameters and also it will be economic and easy to manufacture and assembly. Thus, I would be very grateful if you could prepare for me one more (optional) offer for magnets N42 or N48. (I enclosed picture with dimensions).
Surface/coating: Ni-Cu-Ni
Type: N42 or N48
Magnetic direction: along a dimension of 20mm
Neodymium Arc Magnet Manufacturer – China Rare Earth Magnet Limited
Below I listed our offer of your new inquired arc permanent magnets as below, please kindly check:
Material: Sintered NdFeB Magnet
Size: R500x r400x20mmx4°
Coating: NiCuNi, Magnetized through 20mm
Grade/Ex-works Shenzhen Price: N42/USD***/pc
N48/USD***/pc
Tags: Permanent Magnet, Neodymium Magnet, China Magnet
Client of China N42 Large Neodymium Ring Magnet:
I would be very grateful if you could prepare for me an offer for magnets below.
China Rare Earth Permanent Magnet
Type: N42
Surface/ Coating: NiCuNi
Magnetization direction: along the dimension of 100mm in diameter perpendicularly.
And I have a few questions:
Is there a huge difference in price between magnets N42 and N48?
Is it possible to divide the magnet in each plane into smaller parts if it reduce the price?
We are interested in the lowest production costs.
Custom Permanent Magnet Manufacturer – China Rare Earth Magnet Limited
D250xd100x100mm neodymium magnet is too large to be produced. It's not workable.
The largest size we can offer is D200xd100x50mm. Below I listed our offer based on both N42 and N48 grade, please kindly check:
Material: Sintered NdFeB Magnet
Size: D200xd100x50mm
Coating: NiCuNi, Magnetized through 50mm
Grade/FCA Shanghai Price: N42/USD***/pc
N48/USD***/pc
Mould Fee: USD***
Client of D200xd100x50mm China Neodymium Permanent Magnet:
If I connect 4 magnets together (D200xd100x50mm) they will have the same properties such as one large magnet (D200xd100x200)?
Large Neodymium Magnets Manufacturer – China Rare Earth Magnet Limited
Yes, you understand correct. As theory predicts that, collecting 4pcs D200xd100x50mm magnets would be kind of stronger than one piece D200xd100x200mm magnets. While it's just a speculation, the details should only be known after test.
Client of China Large Permanent Magnet:
Now everything is clear.
Our R&D department is designing magnetic bearings for our wind turbines. We are looking for an ideal solution which will give us a product which will have specified technical parameters and also it will be economic and easy to manufacture and assembly. Thus, I would be very grateful if you could prepare for me one more (optional) offer for magnets N42 or N48. (I enclosed picture with dimensions).
Surface/coating: Ni-Cu-Ni
Type: N42 or N48
Magnetic direction: along a dimension of 20mm
Neodymium Arc Magnet Manufacturer – China Rare Earth Magnet Limited
Below I listed our offer of your new inquired arc permanent magnets as below, please kindly check:
Material: Sintered NdFeB Magnet
Size: R500x r400x20mmx4°
Coating: NiCuNi, Magnetized through 20mm
Grade/Ex-works Shenzhen Price: N42/USD***/pc
N48/USD***/pc
Tags: Permanent Magnet, Neodymium Magnet, China Magnet
2014年4月1日星期二
Custom Permanent Magnet Made by China Rare Earth Magnet Limited
150x40x20mm Neodymium Permanent Magnets with 2 Countersunk Holes
Client of Permanent Magnet:
I have one question seeking magnet neodymium iron boron magnet N52 150x40x20mm dimensions or of similar size, the direction of magnetization Thorugh 20mm - quantity 60 pieces. 150 to 200x35 to 40x20mm. With two holes for screw-it will be full of satisfaction. Please give me the shipping price given my address: Polish city of Malbork.
Custom Neodymium Magnet Manufacturer–China Rare Earth Magnet Limited:
Please send us a drawing to show the hole on it.
Client of China Magnets:
Holes with a diameter of 6 mm at the conical screws, the two sides of the magnet.
Neodymium Iron Boron Magnet Manufacturer – China Rare Earth Magnet Limited:
Plesae complete the drawing showed below.
Client of Neodymium Magnets:
Custom China Permanent Magnet Manufacturer – China Rare Earth Magnet Limited:
Please check the enclosed drawing. Please confirm whether it is correct or not.
Client of Custom Permanent China Magnet:
That's probably all that can be dimensioned in this drawing, the magnet has to be screwed once screw M6 from the "N" and once from the "S" neodymium magnet is to have dimensions 150x40x20mm with the highest N.
China Permanent Magnet Manufacturer - China Rare Earth Magnet Limited:
Please check the price as follows: Neodymium Magnet, N52, 150x40x20mmx90°(as per drawing), NiCuNi, Magnetized Through 20mm, Ex-works Shenzhen USD***/pc Please tell us your nearest airport so that we can calculate the airfreight for your reference!
Tags: Permanent Magnets, China Magnets, Neodymium Magnets
Client of Permanent Magnet:
I have one question seeking magnet neodymium iron boron magnet N52 150x40x20mm dimensions or of similar size, the direction of magnetization Thorugh 20mm - quantity 60 pieces. 150 to 200x35 to 40x20mm. With two holes for screw-it will be full of satisfaction. Please give me the shipping price given my address: Polish city of Malbork.
Custom Neodymium Magnet Manufacturer–China Rare Earth Magnet Limited:
Please send us a drawing to show the hole on it.
Client of China Magnets:
Holes with a diameter of 6 mm at the conical screws, the two sides of the magnet.
Neodymium Iron Boron Magnet Manufacturer – China Rare Earth Magnet Limited:
Plesae complete the drawing showed below.
Client of Neodymium Magnets:
Custom China Permanent Magnet Manufacturer – China Rare Earth Magnet Limited:
Please check the enclosed drawing. Please confirm whether it is correct or not.
Client of Custom Permanent China Magnet:
That's probably all that can be dimensioned in this drawing, the magnet has to be screwed once screw M6 from the "N" and once from the "S" neodymium magnet is to have dimensions 150x40x20mm with the highest N.
China Permanent Magnet Manufacturer - China Rare Earth Magnet Limited:
Please check the price as follows: Neodymium Magnet, N52, 150x40x20mmx90°(as per drawing), NiCuNi, Magnetized Through 20mm, Ex-works Shenzhen USD***/pc Please tell us your nearest airport so that we can calculate the airfreight for your reference!
Tags: Permanent Magnets, China Magnets, Neodymium Magnets
2014年3月31日星期一
Custom China Permanent Magnet Assembly Manufacturer – China Rare Earth Magnet Limited
25x25x3xd10x1x2.7mm N45 Neodymium Permanent Magnets for Smart Phone Charger to Hold the Batteries
Client of Custom Permanent Magnet:
I need a custom neodymium magnet. I attached the sketch and drawing. Everything you see is the magnet. Can you please give me a quote for 10 000 and 20 000pcs of neodymium N45 with basic coating? Magnetization oriented through thickness.
Neodymium Permanent Magnet Manufacturer–China Rare Earth Magnet Limited:
Thank you for contacting us. Your neodymim magnet is a special shaped product. If it is convenient, please tell us the application of your magnet. It will enable us to understand your needs better. Your enquiry is under process. We will send you quotation A.S.A.P if this permanent magnet can be customized.
Application of Custom Permanent Magnet:
Thank you. The magnet will be used in a smart phone charger to hold the batteries. Drawing attached.
If it's not possible to make it in one piece, then maybe a base magnet (plate) with 4pcs neodymium circular permanent magnets glued on the corners would work?
China Permanent Magnet Manufacturer–China Rare Earth Magnet Limited:
To make this neodymium magnet in one piece is very difficult. Our quotation is for a base neodymium magnet glued with 4pcs disc N45 permanent magnets on the corners.
Product: Magnetic Assembly (1 Base Magnet + 4 Disc Magnets)
Material: Sintered Neodymium Magnet; Grade: N45
Size: 25x25x3xd10x1x2.7mm (as per your drawing); NiCuNi
Magnetized through thickness 3mm
10000pcs; FCA Shanghai USD***/set
20000pcs; FCA Shanghai USD***/set
Production time:
for 10,000pcs, 18~26 working days
for 20,000pcs, 18~30 working days
If you have any questions or further demands, please don't hesitate to contact us.
Tags: Permanent Magnet, China Magnet, Neodymium Magnet
Client of Custom Permanent Magnet:
I need a custom neodymium magnet. I attached the sketch and drawing. Everything you see is the magnet. Can you please give me a quote for 10 000 and 20 000pcs of neodymium N45 with basic coating? Magnetization oriented through thickness.
Neodymium Permanent Magnet Manufacturer–China Rare Earth Magnet Limited:
Thank you for contacting us. Your neodymim magnet is a special shaped product. If it is convenient, please tell us the application of your magnet. It will enable us to understand your needs better. Your enquiry is under process. We will send you quotation A.S.A.P if this permanent magnet can be customized.
Application of Custom Permanent Magnet:
Thank you. The magnet will be used in a smart phone charger to hold the batteries. Drawing attached.
If it's not possible to make it in one piece, then maybe a base magnet (plate) with 4pcs neodymium circular permanent magnets glued on the corners would work?
China Permanent Magnet Manufacturer–China Rare Earth Magnet Limited:
To make this neodymium magnet in one piece is very difficult. Our quotation is for a base neodymium magnet glued with 4pcs disc N45 permanent magnets on the corners.
Product: Magnetic Assembly (1 Base Magnet + 4 Disc Magnets)
Material: Sintered Neodymium Magnet; Grade: N45
Size: 25x25x3xd10x1x2.7mm (as per your drawing); NiCuNi
Magnetized through thickness 3mm
10000pcs; FCA Shanghai USD***/set
20000pcs; FCA Shanghai USD***/set
Production time:
for 10,000pcs, 18~26 working days
for 20,000pcs, 18~30 working days
If you have any questions or further demands, please don't hesitate to contact us.
Tags: Permanent Magnet, China Magnet, Neodymium Magnet
N35 D10x10mm China Permanent Magnet Manufacturer – China Rare Earth Magnet Limited
D10x10mm N35 Neodymium
Permanent Magnet Packed in Plastic Tube
China Magnet Manufacturer – China Rare Earth Magnet
Limited
For a bit long time, we didn't receive enquiry from
you. Do you still need such kind of permanent magnets?
Material: Sintered Neodymium Magnet
Size: D10x10mm; Grade: N35; Coating: NiCuNi;
Magnetized through Thickness
Quantity: 15000pcs
Remark: 5pcs packed in a plastic tube. N pole side faces to the red cap,
S pole side faces to the black cap end.
Client of D5x5mm
Permanent Magnet:
What is your best price
for 25.000pcs (5x 5) = 5000 tubes as in the picture? Maybe it is too late, I
will check but if you can give a good prize and delivery time I will check if I
can stop our order.
Neodymium Magnet Manufacturer – China Rare Earth Magnet
Limited
You wrote (5x5), do you need D5x5mm as well? Our
best price for both sizes is listed as below. Hope it is not late.
Material: Sintered Neodymium Magnet
Size: D10x10mm; Grade: N35; Coating: NiCuNi;
Magnetized through Thickness
Quantity: 25000pcs; FCA
Hong Kong Price USD***/pc
Size: D5x5mm; Grade: N35; Coating: NiCuNi;
Magnetized through Thickness
Quantity: 25000pcs; FCA
Hong Kong Price USD***/pc
Remark: 5pcs packed in a plastic tube. N pole side faces to the red cap,
S pole side faces to the black cap end.
If you have any comments about our offer, please let
us know directly.
We sincerely hope we can reach the cooperation.
Client of D5x5mm
& D10x10mm N35 Magnets:
Please send me the PI,
I will arrange payment soon.
Permanent Magnet Manufacturer – China Rare Earth Magnet
Limited
I attached the PI with our bank account details. How
often do you order these permanent magnets please? Please send us an enquiry
before you release a new order in future.
-----------------------------------------------------------------------------------------------------------------------------------
Tags: Permanent Magnet, China Magnet, Neodymium
Magnet, Rare Earth Magnet
2014年3月27日星期四
TNM-8 Bonded Neodymium Permanent Magnet for Electric Motors
TNM-8 Bonded
Neodymium Permanent Magnet for Electric Motors
Client of Permanent CIRCULAR MAGNET:
Our
company dedicates to manufacture electric motors. Our Headquarters and one of
our two plants are located in Mexico
City. Found your data in the internet and are
interested in getting a quotation of a rare earth neodymium permanent magnet
that we require, as per our drawing, copy attached. Please quote in quantities
of 1K, 5K, 10K and 20K units. Please acknowledge receipt of this request for
quote.
China Neodymium Magnet Manufacturer - China Rare Earth Magnet Limited:
Well
received your enquiry with many thanks. What's the magnetization direction of
your neodymium permanent magnets, as picture below? Which one?
Waiting
for you soon reply to forward the quotation.
Client:
Just to
let you know that I received your email below but right now I'm not able to
respond to you but until the return of our engineer in charge of this project,
by ends of this week.
Client:
In
response to your question, engineering says that the magnetization direction
should be as per your first picture, through diameter. Please revert.
Client of Bonded Neodymium Permanent Magnets:
Please be
advised that permanent magnet drawing was recently modified. You received
the previous version. Enclosed please find a copy of the updated drawing,
for quote purposes. As mentioned below, please note that the magnetization
direction of bonded neodymium magnet should be through diameter and magnetized
to 4-pole, 2 N and 2 S, as specified in the drawing attached.
Neodymium Magnet Manufacturer - China Rare Earth Magnet Limited:
Thank you for the
email. Please find our offer as below:
Material: Bonded
Neodymium Magnet
Size: D1.73"xd1.53"x1.325"
Tolerance +0.004"/0
Grade: TNM-8
Coating: Black Epoxy
Magnetized;
Magnetization Direction: 4 poles magnetized through diameter (as picture below)
Unit price of
magnets: FCA Shanghai USD***/pc; Mould fee:
USD***; Fixture fee: USD***
PS: Our
magnets are all customized as each client's requirements, especially the bonded
neodymium magnets. So, we have none similar magnets in stock closed to yours,
sorry!
If you demand any permanent magnet (NdFeB, SmCo, AlNiCo, Ferrite, Ceramic) or magnetic assembly, magnetic tool, welcome to contact China Rare Earth Magnet Limited
2014年3月7日星期五
Neodymium Permanent Magnet Manufacturer – China Rare Earth Magnet Limited
Client of Neodymium Magnets:
Could I
get a quote on the following rare earth permanent magnets?
9.5mm x
2.5mm Neodymium N-25 Grade Nickel coated (250k per order)
8mm x 3 mm
Neodymium N-35 Grade Nickel coated (100k per order)
1/4" x .060" x 1" Neodymium N-35 grade Nickel coated (30k per order)
Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
For your
last type of magnets (1/4" x .060" x 1"), size in mm is
6.35x1.524x25.4mm, right? What's the magnetization direction? Through 1"? We'll
quote after getting your reply.
Client of N35 Neodymium Magnet:
Nice day. Is
there any news of my below question? I’m waiting for your reply to forward the
quotation.
China Magnet Manufacturer China Rare Earth Magnet Limited:
As I still
do not get your answer about the magnetization direction, we quote based on the
below for your reference first. Please feel free to inform us if you have any
doubt of it:
Material:
Sintered Neodymium Magnet
Size/Grade/Coating/Magnetization/Magnetization
Direction/Quantity/FCA Shanghai Price for Sea packaging
D9.5x2.5mm/N25/NiCuNi/Magnetized/Through
2.5mm/250000pcs/USD***/pc
D8x3mm/N35/NiCuNi/Magnetized/Through
3mm/100000pcs/USD***/pc
1/4"x0.06"x1"(6.35x1.524x25.4mm)/N35/NiCuNi/Magnetized/Through
1"/30000pcs/USD***/pc
Period of
validity of price: 2 days
Production
time: 20-22 working days after receiving your payment
Welcome to
contact China Rare Earth Magnet Limited for any questions or feedbacks.
2014年3月5日星期三
N35 R500x70x50x50mm Neodymium Permanent Magnets, D15x3mm Magnets
Client of Neodymium Magnets:
100
NEODYMIUM SAMPLES EACH TYPE AND 5000 PCS EACH TYPE ALL NICKEL COATED For the
material I need an offer for:
38SH,
40SH, AND 42SH
Enclosed
find the drawings.
China Rare Earth Magnet Limited – Quotation for Neodymium
Permanent Magnet:
Thank you
for your new enquiry about magnets. We sent you permanent magnet offer as attachment
based on your needs.
Client of N35 R500x70x50x50mm Magnets:
Please
send us your offer for 300pcs of R500x70x50x50mm magnets of N35.
Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
Thanks for
your inquiry! Please check the price as follows:
Material: Neodymium
Rare Earth Permanent Magnet
Grade: N35
Size: R500x70x50x50mm
Plating: NiCuNi
Magnetized
or not: Magnetized
Magnetization
direction: Through diameter(as your drawing)
Price: FCA
Shanghai USD***/pc
Client of D15x3mm Magnets:
Can you
please advise a quote for 20,000 magnets that we always buy from you?
Neodymium Magnet Manufacturer China Rare Earth Magnet Limited:
We'd like
to keep the same price for you even though you reduce the quantity. Please
check the price as follows:
Type: China Rare Earth Permanent Magnet
Material
|
Size
|
Plating
|
Magnetized or not
|
Magnetization direction
|
FCA Hong Kong USD/pc
|
Sintered Neodymium
Magnet / N35
|
D15x3mm
|
NiCuNi
|
Magnetized
|
Through 3mm
|
***
|
订阅:
博文 (Atom)